How to make and program an FPV drone
Table of Contents
1. What do you need to fly an FPV drone?
1.2 What do you need to fly an FPV drone?
2. Explanation of how the parts work
2.1There are two types of signals digital and analog
3. The steps to be able to make an FPV drone
3.1 Assemble frame
3.2 Confirm Motors
3.3 Wiring diagram
3.4Install the ESC and flight controller
3.5 Solder the connector to the flight controller
3.6 Iinstall the analog system or digital system with the camera
3.8 Check the parts
3.9 Connect the transmitter to the receiver
4. The steps to follow to program your Fpv drone
4.1 Connect the Micro-USB to the flight controller and the USB to the computer (step 1)
4.2 Install the new firmware on the flight controller (step 2)
5. Calibrate the accelerometer (step 3)
5.1Configure the "smart audio" and receiver (step 3.1)
5.2Copy and paste the codes in the CLI tab (step 3.2)
6. Check if the receiver is working properly (step 4)
7. Configure the motors (step 5)
8. Check that the arrow on the flight controller is pointing in the right direction. (step 6)
9. Type the battery setting (step 7)
10. Leave the settings under the "PID Tuning" tab (step 8)
11. Configure the Mode on the circuitry at the transmitter (step 9)
12. Check if the motors rotate in the correct direction (step 10)
13. The last steps to get the drone ready (step 11)
13.1(step 11.1)
13.2(step 11.2)
What do you need to fly an FPV drone?
Transmitter
FPV goggles
Lots of battery and battery charger
Lots of propellers
Your Fpv drone itself
Confirm a lot of battery
You need these parts
Frame
Camera
Engines
Vtx (video transmeter)
Esc (Electronic Speed Controllers)
Flight controller
Receiver
Antenna
You need these tools
Necessarye tools
-
Soldering iron
-
solderin
-
Tin cleaner
-
Hex screwdrivers set
-
Philips head screwdrifar
-
Scissors
-
3M double sided foam tape
-
Multimeter
-
Acollection of 2mm long zip ties
-
Heat shrink
-
Propeller nut tools
-
Pliers
-
Threadlocker
Additional tools
-
Soldering aids hands
-
Ralso stopper
-
A pack ofmetal 3M screws and nuts
-
Also a pack of nylon 3M screws and nuts
-
Ummagrip Sticky Battery Pad
-
Ext60connectors
Ext60connectors
Metal 3M screws and nuts
Smoke Quitper
Nylon 3M screws and nuts
Ummagrip Sticky Battery Pad
